SPRINGSTEP III

The most absorbent and least resilient of the three subfloors, comes 1-1/2" (38.10 mm) off the slab. Reduces sound levels slightly and works exceedingly well for ballroom and other dance styles. Consists of layers of 1/2" (12.70 mm) ply resting on 1/2" (12.70 mm) cross-link cell foam sheeting covering the entire slab. Specifications: Same wood, screw, glue specs as SSII except for 1/2" (12.70 mm) foam sheeting.

SPECIAL FEATURES

• A wonderful balance of absorbency and resiliency
• Ideal for multi-purpose dance studio

Quick Select System: CONSTRUCTION

SPRINGSTEP III

Seal concrete slab against moisture. Roll out foam sheeting to conform to slab. Tape seams of foam. Loosely lay bottom layer of ply directly on foam. Stagger seams. 1" (25.40 mm)continuous thread wood deck screws with counter sinking heads. Tape or patch screw heads and sand seams to realize smooth surface. (see Illustration 4)  

 

SPRINGSTEP III

1/2" (12.70 mm) Foam Sheeting – $1.50 sq. ft.

Plywood (2 Layer) – $2.00 sq. ft.

Screws & Glue – $.20 sq. ft.

Total – $3.70 sq. ft. (estimate)

Foam Sheeting comes in rolls 5' (1.5 m) wide and any length up to 200 feet (60.96 m).